Urea Ammonium Phosphate 20-20-0 fortified with 13% Sulphur
A fortified fertiliser specified under the Fertiliser Control Order, 1985 (Schedule I, Part A, 1(h), item 24). Key notified values: Total Nitrogen in (ammoniacal and urea) 20.0 min; Available phosphorus 20.0 min; Water soluble phosphorus 17.0 min. Added by S.O. 3224(E) of 3 Oct 2017.
Tip This is a compliance tool, so it is best viewed on a desktop or laptop. The phone version shows everything too.
Specification
As notified in the Order, line by line. Values are per cent by weight unless the line says otherwise.
How to read this table
- Minimum means the product must contain at least this much; maximum means not more than this (moisture, impurities and heavy metals have a maximum).
- Per cent by weight means grams in every 100 g of product: 0.5 per cent zinc is 5 g of zinc in every kg.
- P₂O₅ and K₂O: phosphorus and potassium are declared as their oxides. To get the element, multiply P₂O₅ by 0.436 and K₂O by 0.830.
- Tolerance: a lab result may fall slightly short of the notified value before the sample is called non-standard; the limits are in Schedule I, Part B.
- S.O. … (E) is the number of the Gazette notification that made a change; “in force” (w.e.f., with effect from) is the date it started to apply.
| Parameter | Notified value | |
|---|---|---|
| (i) | Moisture per cent. by weight, maximum | 1.5 |
| (ii) | Total Nitrogen in (ammoniacal and urea) per cent. by weight, minimum | 20.0 |
| (iii) | Available phosphorus (as P₂O₅) per cent. by weight, minimum | 20.0 |
| (iv) | Water soluble phosphorus (as P₂O₅) per cent. by weight, minimum | 17.0 |
| (v) | Elemental Sulphur (as S) per cent. by weight, minimum | 6.5 |
| (vi) | Sulphate Sulphur (as S) per cent. by weight, minimum | 6.5 |
| (vii) | Particle size—Minimum 90% of the material shall retain between 1 mm IS sieve and 4 mm IS sieve |
Applies to all fortified fertilisers (S.O. 2345(E), 29 May 2023): It includes all such fertiliser of standard prescribed in Schedule I and is fortified with maximum two micronutrients of the range specified in para (i) of sub-clause (q) of clause 2.
Tolerance: how far a sample may fall short of a declared value is set in Schedule I, Part B; see the tolerance limits.
Test method (Schedule II, Part B): method 28: Customised and fortified fertilisers.
Check a lab report
Compare the results of a lab test with this specification, line by line, including the tolerance allowed in Part B. Enter each result as on the report (per cent by weight unless the line says otherwise). A guide only: the report of a notified laboratory decides whether a sample is standard.
| Parameter | Notified | Lab result | Result |
|---|---|---|---|
| (i) Moisture | 1.5 maxtolerance 0.3 units | ||
| (ii) Total Nitrogen in (ammoniacal and urea) | 20.0 mintolerance 0.5 units | ||
| (iii) Available phosphorus | 20.0 mintolerance 0.5 units | ||
| (iv) Water soluble phosphorus | 17.0 mintolerance 0.5 units | ||
| (v) Elemental Sulphur | 6.5 mintolerance 0.5 units | ||
| (vi) Sulphate Sulphur | 6.5 mintolerance 0.5 units | ||
| (vii) Particle size | 90% of the material mintolerance 7 units |
Notification history
- 3 Oct 2017S.O. 3224(E): entry inserted
Before you make, label or buy it
- Manufacturers and importers: each declared value on the label must meet the limit above; samples are tested by the notified method.
- Dealers and farmers: check that the product name and declared contents on the pack match this specification, and keep the bill with the batch number.
- Doses are not part of this specification: follow the label and local agricultural advice.
Questions? Ask our agri expert on WhatsApp.
Show more fortified fertilisers 41 others
Consolidated by NanoKheti from the Fertiliser (Inorganic, Organic or Mixed) (Control) Order, 1985, as amended up to the Ninth Amendment Order, 2026 (S.O. 4045(E), 22 Jul 2026), for reference. The Gazette text is authoritative; this page is not legal advice. Check the notification before labelling, licensing or buying. Checked for later changes on 20 October 2026.