Trusted by 50,000+ farmers across 11 statesFree delivery above ₹999Cash on delivery
🛒 Shop
BiofertilisersFCO Schedule III

Liquid Consortia

A biofertiliser specified under the Fertiliser Control Order, 1985 (Schedule III, Part A, item 10). Key notified values: Individual organism viable count CFU minimum in a mixture of any 2 or maximum three of following microorganisms: CFU minimum Rhizobium or Azotobacter or Azospirillum 5×107 cells per milliliter (ml).

ScheduleSchedule III, Part A
Item no.10

Tip This is a compliance tool, so it is best viewed on a desktop or laptop. The phone version shows everything too.

Specification

As notified in the Order, line by line. Values are per cent by weight unless the line says otherwise.

How to read this table
  • CFU (colony forming units) is the count of live cells in the lab test: 5×107 means 5 crore cells in every gram (or mL, for liquids).
  • Tolerance: a lab result may fall slightly short of the notified value before the sample is called non-standard; the limits are in Schedule III, Part B.
  • S.O. … (E) is the number of the Gazette notification that made a change; “in force” (w.e.f., with effect from) is the date it started to apply.
ParameterNotified value
Individual organism viable countCFU minimum in a mixture of any 2 or maximum three of following microorganisms: CFU minimum Rhizobium or Azotobacter or Azospirillum 5×107 cells per milliliter (ml).
CFU minimum PSB 5×107 cells per milliliter (ml).
CFU minimum KSB 5×107 cells per milliliter (ml).
Total viable count of all the biofertilisers in the productCFU minimum 1.5×108 cells per milliliter (ml).
pH5.0-7.0
Contamination levelNo contamination at any dilution.
Efficiency characterThe efficiency character of individual microorganisms to be determined as mentioned in case of individual biofertilizers through quantitative estimation methods.

Tolerance (Schedule III, Part B): 2. In case of Consortia, the total viable count shall not be less than 1×107 in case of carrier based and 1×108 in case of liquid formulations.

Test methods: Schedule III, Part D (methods of analysis of biofertilisers).

Check a lab report

Compare the results of a lab test with this specification, line by line, including the tolerance allowed in Part B. Enter counts as on the report, for example 5x10^7, 5e7 or 50000000. A guide only: the report of a notified laboratory decides whether a sample is standard.

ParameterNotifiedLab resultResult
Rhizobium, Azotobacter or Azospirillum, cells per mL5×107 per mL min
PSB, cells per mL5×107 per mL min
KSB, cells per mL5×107 per mL min
Total viable count, cells per mL1.5×108 per mL minwith the tolerance: 1×108 min
pH5.0-7.0

Notification history

  • 1 Jul 2021S.O. 2671(E): entry substituted (in force 2 Jul 2021)

Before you make, label or buy it

  • Manufacturers and importers: each declared value on the label must meet the limit above; samples are tested by the notified method.
  • Dealers and farmers: check that the product name and declared contents on the pack match this specification, and keep the bill with the batch number.
  • Doses are not part of this specification: follow the label and local agricultural advice.

Questions? Ask our agri expert on WhatsApp.

Read more on NanoKheti

Show more biofertilisers 10 others

See all 11 biofertilisers →

Consolidated by NanoKheti from the Fertiliser (Inorganic, Organic or Mixed) (Control) Order, 1985, as amended up to the Ninth Amendment Order, 2026 (S.O. 4045(E), 22 Jul 2026), for reference. The Gazette text is authoritative; this page is not legal advice. Check the notification before labelling, licensing or buying. Checked for later changes on 20 October 2026.